Sony A80K/A80CK OLED Calibration Settings

We used the following calibration settings to review the 65-inch Sony A80K (XR-65A80K), and for the most part, we expect them to apply to the 55-inch (XR-55A80K) and the 77-inch (XR-77A80K) models as well. These settings should apply to most types of content, except for gaming or use as a PC monitor, which require a few additional changes, listed below.

These settings are meant to provide you with a starting point; they're not meant to be copied 1:1. They provide the most accurate image in a dark room, but you should adjust them to match your personal preferences and viewing conditions.

For SDR content, there are a few different preset picture modes you can choose. We used the 'Custom' Picture Mode because it's the most accurate out of the box and allows for the most customization. The 'Vivid' Picture Mode offers a slightly brighter image, but the difference is minimal, and the image is less accurate.

We set the Brightness to '44' because we calibrate the TV at 100 cd/m², but this is too dim for most rooms. You should adjust the Brightness to your specific viewing conditions, and changing this doesn't have any impact on the overall picture quality. Note that the Brightness setting adjusts the backlight, while Black Level adjusts blacks, and the Peak Luminance setting allows the TV to get brighter.

There are a few settings you can adjust on the Picture settings page to optimize the image to your preference. We set the Contrast to '90', Gamma to '0', and Black Level to '50'. For our calibration, Black Adjust and Advanced Contrast Enhancer were disabled, but you should adjust these to your liking. We also used the 'Expert 1' Color Temperature because it's closest to the target color temperature, but use 'Cold' or 'Warm' if you prefer colder or warmer settings.

In the Clarity tab, we left Sharpness to the default value of '50'. We also left Reality Creation disabled, but you can enable it when watching lower-resolution content, as it can help to improve the image quality. Random Noise Reduction, Digital Noise Reduction, and Smooth Gradation were also left disabled as they can cause a loss of fine details in higher quality content.

To set HDR so it's automatically enabled, set HDR Mode to 'Auto' in the Video Signal tab. When you start playing HDR content, a small HDR icon appears in the picture settings menu. When HDR is enabled, some settings change automatically, including the Brightness, which increases to 'Max.' We used the 'Custom' Picture Mode for HDR, the 'Expert 2' Color Temperature, and left the other settings as-is. Adjust the settings to find the image you find is best. We set the HDR Tone Mapping setting to 'Gradation Preferred' but set it to 'Brightness Preferred' if you want a brighter image. There are also 'IMAX Enhanced' and 'Cinema' Picture Modes, but they're less accurate than 'Custom'.

When watching Dolby Vision content, you choose between 'Dolby Vision Bright', 'Dolby Vision Dark', and 'Vivid'. 'Dolby Vision Bright' is the most accurate, but choose whichever you prefer.

For HDR to work from external devices, you need to adjust the HDMI Signal Format accordingly. HDMI ports 1 and 2 support HDMI 2.0, so they're limited in the bandwidth they support. However, HDMI ports 3 & 4 have four different HDMI Signal Format options you can choose from:

• Standard Format: Limits the bandwidth to HDMI 1.4. Use this for older devices that don't need the extra bandwidth, like DVD players, cable boxes, or the PS3 and Xbox 360, as using a higher setting may result in compatibility issues.
• Enhanced Format: Uses the full bandwidth of the selected port. HDMI 1 and 2 have HDMI 2.0 bandwidth, which is good for older gaming consoles like the PS4 or Xbox One, or Blu-rays. HDMI 3 and 4 have HDMI 2.1 bandwidth, which is ideal for current-gen gaming consoles, PCs, and other HDMI 2.1 devices.
• Enhanced Format (Dolby Vision): Meant for Dolby Vision content, like from streaming devices like a Roku stick or Apple TV, or Blu-ray players. It limits the refresh rate with 4k signals to 60Hz, so if you want to use the TV for high-frame-rate gaming and the game doesn't support Dolby Vision, make sure you don't have this setting selected.
• Enhanced Format (VRR): Enable this when gaming and you want the VRR support.

Sony TVs usually feature great, highly customizable motion features. Although we disable most motion settings for most of our tests, you should adjust these to whatever looks best for you. Some settings, like motion interpolation, may need to be adjusted depending on the specific content you're watching.

If you want to enable motion interpolation, set CineMotion to 'High', Motionflow to 'Custom,' adjust the Smoothness slider to its max, and keep the Clearness to its minimum. Most of these settings will need to be adjusted depending on the specific content you're watching.

The Clearness adjusts the Sony A80K's black frame insertion feature, which only flickers at 60Hz. However, you can't enable the BFI feature at the same time as VRR.

The Sony A80K can remove judder from 24p sources. It automatically removes it from native 24p signals, like Blu-rays. For 60p/i signals, like a cable box or from streaming apps, set Smoothness and Clearness to their minimum with Motionflow set to 'Custom' and enable CineMotion.

From the base SDR and HDR settings, very few changes are required for a great gaming experience. When you start gaming, it's best to switch to the 'Game' Picture Mode to get the lowest input lag and use the same settings for SDR or HDR. Enable Auto Picture Mode so that the TV automatically switches into Game Mode when you start playing a game.

Unlike TVs from most other brands, no special settings are required for PC use on the Sony A80K. Just make sure you're using either the 'Game' or 'Graphics' Picture Mode and that you set HDMI Enhanced Format to 'Enhanced Format' for the input you're using. Both of these modes offer low input lag and display chroma 4:4:4 properly, which is important for text clarity.

The Sony A80K supports eARC passthrough on HDMI 3, so you can pass high-quality audio to a compatible receiver. It supports both Dolby Atmos and DTS:X audio formats. To enable either, enable eARC Mode, set Digital Audio Out to 'Auto 1', and enable Pass through all from the Audio Output settings.

One of the first things we did was disable Power Saving, as we don't want the TV to adjust the image during testing. From the Picture menu, we disabled Auto Picture Mode and Light Sensor as we don't want the picture settings changing during calibration.

When watching lower resolution content, the upscaling method may need to be adjusted depending on the specific format. You can adjust the screen position and aspect ratio from the Screen page on each input.

Although we don't expect this to be an issue for most people, burn-in is a possibility on the A80K. There are a couple of settings you should be aware of to ensure you get the most out of your new TV. These can be found in the Expert Panel Settings menu.

Pixel Shift, as the name describes, shifts the entire image a few pixels to one side and gradually shifts it in a different direction over time. This helps reduce the effects of burn-in from very small elements, like fine lines in a game HUD. We recommend leaving this enabled. The screen shift isn't very noticeable unless you're using the TV as a PC monitor.

The Panel Refresh feature lets you run a complete pixel refresh cycle to reduce the possibility of burn-in. However, Sony recommends only using this option a maximum of once per year.

The Sony A80K has a few accessibility features, and the settings are available in the Accessibility section. You can enable Captions, Audio Description, High Contrast Text, and Text to Speech, to name a few.

Google TV has an Ambient Mode available to display your Google Photos or pictures of art if you want the TV to display a slideshow while you're not actively using it. You can even control the slideshow speed.

The included remote has a built-in mic for voice control, and the remote needs to be connected to the TV via Bluetooth for it to work. If the voice control isn't working, make sure it's connected via Bluetooth in the Remotes & Accessories page of the settings menu. The TV has a microphone built-in, and there's a switch to turn it on if you prefer. If you keep it on, you can change the sensitivity.