Sony BRAVIA 3 Calibration Settings

We used the following calibration settings to review the 75-inch Sony BRAVIA 3, and we expect them to apply to the 43, 50, 55, 65, and 85-inch models as well. These settings should apply to most types of content, except for gaming or use as a PC monitor, which require a few additional changes, listed below.

These settings are meant to provide a starting point; they're not meant to be copied 1:1. They provide the most accurate image, but you should adjust them to match your preferences and viewing conditions.

Note: Sony has added "(SDR)" and "(HDR)" to all of the setting names to make it clear what content your setting changes will impact. For simplicity and readability we're not including that in our setting names, so refer to the category titles to know if a section is for SDR or HDR settings.

For SDR content, you can choose a few different preset picture modes. We used the 'Professional' Picture Mode because it's the most accurate out of the box and allows for the most customization. This mode, new to the 2024 models, replaces the old 'Custom' mode. A 'Brightness' setting of '13' corresponds to about 200 nits on our unit, but you should adjust this setting to your specific viewing conditions.

You can adjust a few settings on the Picture settings page to optimize the image to your preference. We set the Contrast to '90,' Gamma to '0,' and Black level to '50.' For our calibration, Black adjust and Adv contrast enhancer were disabled, but you should adjust these to your liking. We also used the 'Expert 1' Color temperature because it's closest to the target color temperature.

In the Clarity tab, we left Sharpness to the default value of '50.' We also left Reality Creation disabled for most of our testing, but you can enable it when watching lower-resolution content, as it can help to improve the image quality. Random noise reduction and Digital noise reduction were also left disabled, as they can cause a loss of fine details in higher-quality content.

To set HDR so it's automatically enabled, set HDR Mode to 'Auto' in the Video Signal tab. When you start playing HDR content, a small HDR icon appears in the picture settings menu. When HDR is enabled, some settings change automatically, including the Brightness, which increases to 'Max.' We used the 'Professional' Picture Mode for HDR and the 'Expert 2' Color temperature and left the other settings as-is. Adjust the settings to find the image you find is best.

The following are the old results of calibrating the white balance of our unit to 6500K in HDR using the 2 point method. We don't publish the values we used for our new 20 point calibration.

These are provided for reference and shouldn't be copied as the calibration values vary per individual unit, even for the same model and size as the TV we reviewed, due to manufacturing tolerances. If you want to try them, you'll need to enter all values shown, as all of them are active simultaneously. If you have worse picture quality, simply reset them to the default values.

Although we disable most motion settings for most of our tests, you should adjust these to whatever looks best. Some settings, like motion interpolation, may need to be adjusted depending on the specific content you're watching.

If you want to enable motion interpolation, set Motionflow to 'Custom' and adjust the Smoothness and Clearness sliders to your preferred settings.

The Sony BRAVIA 3 automatically removes judder from 24Hz sources. It doesn't remove judder from 60Hz sources like a cable box.

From the base SDR and HDR settings, very few changes are required for a great gaming experience. When you start gaming, change the Content Type setting to 'Game' to ensure you get the lowest input lag. From there, you can choose from multiple gaming presets like 'Standard (Game),' 'FPS game,' or 'RTS game' and then fine-tune your picture settings to your liking.

For clear text from a PC and proper chroma 4:4:4 support, simply change the Content Type setting to 'Graphics.'

The Sony BRAVIA 3 supports eARC, or enhanced audio return channel, on HDMI port 3, so you can pass high-quality audio from a connected player, like a Blu-ray player or cable box, to a compatible receiver. To enable it, go to the Audio Output settings menu and set eARC setting to 'Auto' and Digital audio output to 'Prioritize pass through.'

The Sony BRAVIA 3 has a few accessibility features, and the settings are all available in the Accessibility section. You can enable Captions, High Contrast Text, and Text to Speech, to name a few.

One of the first things we did was disable Power Saving, as we didn't want the TV to adjust the image during testing. We also disabled the Ambient Optimization Pro feature.